dsp 3mm wood board laser cutter 1200*2500mm jinan factory

3mm wood board laser cutter: 1.1200*2500mm working size 2.150W laser power 3.compulsive water cooling system 4.red light

dsp 3mm  wood board laser cutter 1200*2500mm jinan factory

Feature:

The working area can meet the demands of engraving and cutting on large scale garments and cloth, leather, wood, acrylic and paper industry.

Sameng Laser cutting machine for plywood, MDF, Balsa Wood, and many other wood types

Sameng woodworking lasers are optimally suited for laser engraving and laser cutting wood and timber, such as for example toys, decorative items, artistic craftwork, souvenirs, Christmas decorations, gifts, architectural models, and for wood inlays.

 

Types of wood suitable for laser cutting & engraving:

Alder wood		Balsa wood
Beechwood		Cedar wood
Fine wood		Genuine wood
MDF		Natural wood
Solid timber		Solid wood
Veneer

Applicable Materials: wood, bamboo, cardboard,mdf, veneer,alder wood, black wood, rose wood, olive wood,fine wood, beechwood, solid wood, timber, balsa,cedar wood, genuine wood, natural wood etc..

Applicable industries: advertisement, arts and crafts, leather, toys, garments, model, building upholstery,

Technical parameter:

Model	SM-1225
Laser type	Sealed CO2 laser tube
Laser power	150W
Engraving area	1200*2500mm
Engraving speed	0-24,000mm/min
Resetting position accuracy	±0.1mm
Working voltage	AC110-220V ±10%.50-60HZ
Power	Max 1,500W
Operating temperature	0-45°C
Operating humidity	5-95%
Minimum shaping character	English 1*1mm
Graphic format supported	BMP, PLT, DST, DXF, and AI
Driving system	Stepper
Cooling mode	Water-cooling and protection system
Auxiliary equipment	Exhaust-fan, air-exhaust pipe
Controlling software	DSP control system
Compatible software	Coreldraw auto CAD photoshop

Does the wood burn during laser cutting?In the cutting clearance of the material, the laser will produce a temperature increase that is higher than the sublimation temperature of wood. The "suddenly evaporated" – in other words: sublimated – wood is visible in the form of smoke escaping at a fast rate. This smoke also transports the introduced heat away from the wood. Consequently, there is only relatively low thermal stress on the material near the cutting clearance. By accurate focusing and selecting the appropriate optics and by supplying compressed air, high-quality cuts can be produced. The cutting edges with their brown color can often be used effectively in the design.

Samples:

Can any type of wood be cut and engraved with the laser?Since wood is a natural material, the laser user must consider various characteristics, such as e. g. the density and the resin content, when working with wood. Soft wood types, such as e. g. Balsa wood, require a lower laser power and can be cut at a higher speed. Hard wood, as an example of dense wood types, on the other hand, requires a higher laser power. When working with MDF, which consists of glued wood fibers, Sameng recommends the use of compressed air.

Sameng laser machine spare parts:

dsp 3mm wood board laser cutter 1200*2500mm jinan factory